SLC Modernisation
Active: Most current offering within a product category.
Active Mature: Product is fully supported, but a new product or family exists. Gain value by migrating.
End of Life: Discontinued date announced — actively execute migrations and last time buys. Product generally orderable until the discontinued date.
Discontinued: Product no longer manufactured or procured. Repair/exchange services may be available.
To optimise productivity and minimise risk, it’s important to adopt migration solutions that reduce the challenges of maintaining legacy equipment. NHP and Rockwell Automation can help you develop a tailored modernisation strategy. This strategy can be implemented all at once or in phases, depending on your priorities and budget, facilitating a smooth transition from SLC™ 500 to CompactLogix™ 5380 control systems.
Why upgrade or migrate?
Modern technology helps you stay ahead with better performance and greater efficiency in a global market.
Benefits of CompactLogix™ 5380 control system:
High performance
- Dual one gigabit (Gb) Ethernet port enables high-performance I/O and integrated motion on EtherNet/IP up to 32 axes
- Controller firmware is optimised for maximum performance
Security capabilities
- Digitally signed and encrypted controller firmware
- Controller-based change detection and logging
- Role-based access control to routines and Add-On Instructions
- Ability to enable and disable all embedded ports
- IEC 62443-4-2 Certification Security certified CompactLogix 5380 Controller, Security Level 1 (SL1)
Enhanced productivity with Logix
- Two Ethernet ports for Dual-IP or support for Device Level Ring (DLR) and linear topologies for up to 180 nodes
- Supports up to 31 local I/O modules and memory from 0.6…10 MB
- Onboard display allows for enhanced diagnostics and troubleshooting
- USB port supports local programming, troubleshooting and firmware updates
Develop a modernisation plan
Evaluate your options for a proactive lifecycle plan:
Installed Base Evaluation (IBE)
With a completed IBE and access to the My Equipment portal, you will have a total understanding of your lifecycle risk by site, area, line, machine and panel. This will help ensure you have the right parts in the right place and time.
An Installed Base Evaluation is much more than simply counting parts. It’s a thorough analysis of your critical plant assets and their condition. This service provides knowledge to help you make data-driven decisions regarding the support and obsolescence management of your installed base assets in real-time with My Equipment.
Request Installed Base Evaluation Installed Base EvaluationModernisation services from Rockwell Automation
Reduce lifecycle risks before, during and after the migration process with modernisation solutions that are tailored to your specific needs. Our modernisation services and support help to minimise downtime, maximise operational success and lessen the risk of maintaining legacy equipment. From project management to startup, we will help define and implement an effective modernisation strategy for your facility.
Recognised system integrator or solution provider
Our PartnerNetwork™ program provides an integrated team of engineering specialists and suppliers that are leaders in the automation and manufacturing industry who have experience delivering products or services that are designed to work with Rockwell Automation® solutions.
Do It Yourself
If you prefer to migrate from SLC™ 500 to CompactLogix™ 5380 control system without assistance, Rockwell Automation provides many tools and resources to help you plan and migrate with as little disruption as possible.
Tools to plan and execute your migration
-
IAB
-
RSLogix 500®
-
1492 I/O conversion system
-
CompactLogix 5380 controllers
-
Proposal Works proposal builder
-
SLC EtherNet/IP
-
Compact 5000 I/O
Integrated Architecture Builder
The Integrated Architecture® Builder (IAB) tool is a graphical, user-friendly software tool that allows you to define and configure CompactLogix™ 5380 control system architecture automatically, including a detailed bill of materials (BOM) based on your current SLC™ control system.
RSLogix 5000 or Studio 5000 project migrator
The Project Migrator tool allows you to save time and engineering resources when converting your SLC™ 500 application code. After exporting your RSLogix 500® project file, you can use the embedded conversion utilities to import your code into RSLogix 5000® or Studio 5000 Logix Designer® application
1492 I/O wiring and conversion system
The 1492 I/O conversion system provides a fast and efficient method for converting SLC I/O to Compact 5000 I/O. The I/O conversion is accomplished without removing any field wires from the existing control cabinet, eliminating the risk of wiring errors.
Popular configuration drawings for CompactLogix 5380 controllers
Use these system configuration drawings to build a scalable Integrated Architecture® system for your industrial application and understand the basic performance, capacity and configurations that the controllers can use
ProposalWorks proposal builder
This tool helps you create bill of materials, RFQs and proposals for your automation projects directly from your computer. The tool has more than 1,500 wizards and an easy-to-use search capability to find the right products to meet your application requirements.
SLC EtherNet/IP communication module
The SLC EtherNet/IP™ communication module (1747-AENTR) enables communication and data transfer between a CompactLogix 5380 controller and remote I/O via Ethernet communications. Using the 1747-AENTR module in a phased modernisation allows the existing remote I/O network to remain in place. This also allows the new application to be tested before switchover and to switch back to the old application easily.
Compact 5000 I/O serial module
The Compact 5000™ I/O serial module (5069-SERIAL) enables the communication between a controller and I/O on a serial network. It can function as a local I/O or remote I/O module over an EtherNet/IP network.
Getting started: Analysing your automation system
With industry knowledge and worldwide services support, Rockwell Automation will partner with you to ensure a smooth transition from your SLC™ 500 to CompactLogix™ 5380 control system
Step 1
Document existing system layout and define future system requirements
Begin your migration planning by documenting your existing system as a reference point. This will enable you to consider the available options and find a solution that best meets your existing and future requirements.
Step 2
Plan migration
Once you have your overall migration approach, use Integrated Architecture® Builder (IAB) tool to help plan the details. The SLC migration wizard embedded in IAB will guide you through the system configuration process. You can decide which are the components to reuse or replace. If you choose to reuse the SLC I/O, IAB will verify module support and power supply loading and help you lay out the new EtherNet/IP network. The 1492 I/O conversion system in IAB helps to minimise the risk of wiring errors by preserving existing field wiring connection during I/O conversion.
Moving forward: Executing your project
Whether you choose to migrate all at once or in phases, we have the tools and experience to guide you through the transition. Our approach to modular automation coupled with backward compatibility allows you to maintain productivity as you upgrade portions of your automation system.
Phase 1:
Application code conversion
Save time and engineering resources when converting your SLC™ 500 application code by using the embedded conversion utilities in RSLogix 5000® or Studio 5000 Logix Designer® application. Converting your PanelView™ Standard application to a PanelView Plus 7 application is as simple as importing the existing project into FactoryTalk® View Machine Edition software.
Advantages of application code:
- Converts code using automated code conversion
- Leverages powerful constructs and features to improve the application
Advantages of Human Machine Interface (HMI) application:
- No further modification will be required, most of the time
- Utility generates conversion log, which identifies features that are not supported by the selected new hardware
- Enhanced features and graphics
- Better integration with controllers
Phase 2:
Replace the SLC controller and/or module
Mount and wire the CompactLogix™ 5380 system and replace the SLC first slot module (SLC processor or communication module) with the SLC EtherNet/IP™ communication module (1747-AENTR). Using this module helps you retain your existing SLC I/O and preserve existing field wiring, while allowing your SLC I/O chassis to be controlled from your new CompactLogix controller. This approach simplifies the migration process, reduces risks associated with rewiring the I/O and saves valuable time, which allows you to get your application into production quickly.
Advantages:
- Maintain existing field wiring
- Ability to revert to SLC I/O, if needed
Phase 3:
Replace other system hardware and review investment
If your control system has legacy or competitive variable speed drives, motion control, sensors, or motor control centers, Rockwell Automation can help migrate those products as well. We have a worldwide service group that can do the migration work, assist and train operators or provide the maintenance services once the migration is complete. We can also review your network needs and asset management for your entire facility
Phase 4:
I/O replacement
In the final phase of the migration process, the 1492 I/O conversion system is used to replace SLC™ 500 with CompactLogix™ 5380 control system. Because I/O replacement represents a large investment, we provide an approach that is right for your schedule and budget. The 1492 I/O conversion system allows I/O conversion from SLC™ I/O to the Compact 5000™ I/O without removing existing field wiring connections. This helps to reduce conversion time, labor costs and reduce potential downtime risk that could result from wiring mistakes during the migration. Planning your migration is more manageable as the I/O can be swapped one rack at a time or all at once. In either case, you can run both new and old I/O architectures simultaneously. Additionally, I/O cross-reference documentation assures correctness and provides historical backup for future troubleshooting or diagnostics.
StepForward™ program for SLC™ 500 controllers
What is the StepForward™ program?
Customers who return their existing Rockwell Automation® products will receive a credit when they purchase new participating Rockwell Automation® products.
What is the credit amount listed in the StepForward™ program?
Customers will receive the credit amount based on the credit multiplier* x list price of the new products. (Conditions apply).
When is the effective date for the StepForward™ program for SLC™ 500 controllers?
It is effective from now until December 2025
The Risks of Gray Market and Counterfeit Products
Avoid the Dangers by Purchasing with Confidence from an Authorised Distributor
Your production safety, security, reliability and regulatory compliance all depend on the technologies that power your operations every day. Purchasing industrial automation products from gray market sources can expose you and your customers to serious risks. Rockwell Automation branded products purchased from these sources often fall short of customer expectations and are always inferior to a product purchased from an authorized source.
Help protect yourself and your customers by securing your supply chain to avoid these risks.
How Do Gray Market and Counterfeit Products Fall Short?
No Warranty Coverage
No License for Firmware or Software
Safety & Security
Reliability
Regulatory Compliance
Contact us
You can also contact your local NHP Account Representative or email us.
Australia 1300 NHP NHP nhpservice@nhp.com.au
New Zealand 0800 NHP NHP nhpservice@nhp.com.au